Breville Blend-Active VBL120X, Instructions For Use Manual

Page: 5 / 44

5
Screw the blade assembly onto the blade cover, tighten firmly, and
attach to the motor unit properly
E
. Press the blend button to pulse
in short bursts to achieve the desired texture.
CLEANING
DO NOT IMMERSE THE MOTOR UNIT, POWER CORD OR PLUG
IN WATER OR ANY OTHER LIQUID.
• Clean the motor unit with a damp cloth only.
• Wash the blade assembly in warm, soapy water. Rinse and dry
thoroughly. For stubborn food deposits stuck around the blade,
carefully use a washing up brush.
• Wash the bottle and lid in warm, soapy water. Rinse and dry
thoroughly. Alternatively, the bottle and lid can be washed in a
dishwasher.
QUICK CLEANING METHOD
1. Half fill the bottle with warm water and a drop or two of
detergent then fit the blade assembly. Fit the blade/bottle onto
the motor body as described in the section How To Use.
2. Press the bottle downwards for 10-20 seconds.
3. Remove the bottle, unscrew the blade assembly and rinse
them both under running water.
STORING
Store your Breville
®
Blend-Active
®
blender in its packing or in a
clean, dry place. Ensure all parts are dismantled and keep the
appliance out of the reach of children. Place the blade cover over
the blade assembly for greater protection.
GUARANTEE
Please keep your receipt as this will be required for any claims
under this guarantee.
This appliance is guaranteed for 2 years after your purchase as
described in this document.
During this guaranteed period, if in the unlikely event the appliance
no longer functions due to a design or manufacturing fault, please
take it back to the place of purchase, with your till receipt and a copy
of this guarantee.
The rights and benefits under this guarantee are additional to your
statutory rights, which are not affected by this guarantee. Only
Jarden Consumer Solutions (Europe) Limited (“JCS (Europe)”) has
the right to change these terms.
JCS (Europe) undertakes within the guarantee period to repair
or replace the appliance, or any part of appliance found to be not
working properly free of charge provided that:
• you promptly notify the place of purchase or JCS (Europe) of
the problem; and
• the appliance has not been altered in any way or subjected to
damage, misuse, abuse, repair or alteration by a person other
than a person authorised by JCS (Europe).
Faults that occur through, improper use, damage, abuse, use with
incorrect voltage, acts of nature, events beyond the control of
JCS (Europe), repair or alteration by a person other than a person
authorised by JCS (Europe) or failure to follow instructions for use
are not covered by this guarantee. Additionally, normal wear and
tear, including, but not limited to, minor discoloration and scratches
are not covered by this guarantee.
The rights under this guarantee shall only apply to the original
purchaser and shall not extend to commercial or communal use.
If your appliance includes a country-specific guarantee or warranty
insert please refer to the terms and conditions of such guarantee or
warranty in place of this guarantee or contact your local authorized
dealer for more information.
Waste electrical products should not be disposed of with Household
waste. Please recycle where facilities exist. E-mail us at enquiries
enquiriesEurope@jardencs.com for further recycling and WEEE
information.
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside
Cheadle Royal Business Park
Cheadle
SK8 3GQ
UK
FITTING OF A PLUG - UK AND IRELAND ONLY
If the plug is not suitable for the socket outlets in your home, it can
be removed and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover
must be refitted. The appliance must not be used without the fuse
cover fitted.
If the plug is unsuitable, it should be dismantled and removed from
the supply cord and an appropriate plug fitted as detailed. If you
remove the plug it must not be connected to a 13 amp socket and
the plug must be disposed of immediately.
If any other plug is used, a 3 amp fuse must be fitted either in the
plug or adaptor or at the distributor board.
This symbol indicates that this unit is a Class II
appliance and therefore an earth connection is not
required.
Plug should be BS1363 approved
Ensure that the outer sheath of the cable is firmly held
by the clamp
BROWN
(Live)
3 Amp Fuse
BLUE (Neutral)
E
N
L