wARNING: tHIS APPlIANCE IS
DESIGNED FoR BoIlING
oR HEAtING oF DRINKING
QUAlItY wAtER oNlY.
NEVER USE It to HEAt oR
BoIl ANY otHER lIQUIDS
oR FooDStUFFS. NEVER
INSERt tEA oR CoFFEE
INto tHE KEttlE. tHE
lID SHoUlD AlwAYS BE
loCKED SECURElY INto
tHE CloSED PoSItIoN
BEFoRE USE.
oPERAtING YoUR BREVIllE PRoFESSIoNAl 800 CollECtIoN
®
VARIABlE tEMPERAtURE KEttlE
Before first use
Remove and safely discard any packaging
material or promotional labels attached to your
kettle. It is recommended that before first use
to fill the kettle to the maximum level with cold
tap water, bring to the boil by selecting the
BOIL 100° button, then discard the water. Your
kettle will only operate when positioned on the
power base. The kettle will automatically switch
off when the water has reached the selected
temperature.
operation of your kettle
To fill the kettle, remove the kettle from the
power base and open the lid by pressing the
lid release button. Fill with the desired amount
of water. Always fill the kettle between the
minimum (500) and maximum (MAX 1800)
marks on the water window. Too little water
will result in the kettle switching off before
the water has boiled or reached the selected
temperature.
Ensure the lid is closed and locked firmly
into place. Position the kettle securely onto
the power base. Insert the power plug into
a 230/240 power outlet and switch on.
The START/CANCEL and 100° BOIL button
surrounds will illuminate in white for one
minute. A beep will sound for two seconds.
The START/CANCEL button surround will
automatically switch off after one minute if not
selected.
1.
2.
Select the desired water temperature by
pressing one of the five variable Celsius
temperature buttons (80°, 85°, 90°, 95°,
100°). The selected button and the START/
CANCEL button surround will illuminate in
white.
3.
Press the START/CANCEL button and the
surround will illuminate in red, the selected
temperature button surround will flash in
white and the kettle will start heating. Do not
remove the kettle from the power base during
operation. Ensure the kettle has switched
off after the water has boiled or the selected
temperature has been reached before
removing the kettle from the power base. If
4.
the kettle is removed from the power base
during the Keep Warm function the kettle will
automatically switch off.
When the kettle has heated the water to the
selected temperature, 3 beeps will sound, the
START/CANCEL button surround illumination
will switch off, and the selected temperature
button surround will illuminate for 1 minute
before switching off.
If the Keep Warm function has been selected,
the Keep Warm button surround will remain
illuminated in red, the selected temperature
button surround will remain illuminated in
white, and the kettle will continue to cycle on
and off for 20 minutes.
If further heating of the kettle is not required,
switch off at the power outlet, unplug the
power cord and empty the water from the
kettle. Replace the kettle onto the power base
and close the lid.
5.
6.
7.
wARNING: Do Not oPEN tHE lID
DURING AND AFtER
oPERAtIoN. tHIS MAY
RESUlt IN BoIlING
wAtER SPlASHING FRoM
tHE KEttlE. PoUR All
tHE Hot wAtER FRoM
tHE KEttlE BEFoRE
oPENING tHE lID to
REFIll.
oPERAtING YoUR BREVIllE PRoFESSIoNAl 800 CollECtIoN
®
VARIABlE tEMPERAtURE KEttlE
13
1
Note: If the StARt/CANCeL button is
pressed (before selecting a temperature
button), the StARt /CANCeL button
surround will illuminate in red and the
100º button surround will flash in white
and the kettle will start heating.
Note: the KeeP WARM function can be
selected before, during or on completion
of the water heating cycle (refer page 9).
Note: the default temperature setting of
the kettle when switched on at the power
outlet is 100°.
– When the kettle is switched off at the
power outlet and switched back on,
it will automatically default to the 100°
temperature setting.
– When the kettle remains switched
on at the power outlet and different
temperature settings have been
selected, the kettle will default to the
last selected temperature setting.
Safety boil dry protection
The kettle is fitted with a safety device, which
protects against overheating should the
appliance be operated with insufficient water.
If this occurs the kettle will stop heating and a
continuous tone will sound, indicating a dry boil
error has occurred. The START/CANCEL and
KEEP WARM button surrounds will also flash
in red. Switch off at the power outlet and allow
kettle to cool before refilling. The safety device
will automatically reset when the kettle has
cooled sufficiently.
For additional safety your kettle is fitted with an
additional thermal cut out. In the event of severe
overheating the kettle will automatically shut
down to prevent further damage. Should this
occur, take your kettle to an authorised Breville
Service Centre.
Note: this kettle must be used only with
the power base supplied. Use caution
when pouring water from your kettle,
as boiling / heated water and steam will
scald. Do not pour the water too quickly.
Note: Always fill the kettle to between
the minimum (500) and maximum
(MAX 1800) marks on the water window
on the kettle. too little water will result
in the kettle switching off. Filling above
the maximum mark on the water window
of the kettle may result in boiling/heated
water splashing from the kettle.
BKE820_KETTLE_FA.indd 13-14
3/6/08 11:34:39 AM
