Breville BJE520, Instruction Booklet

Page: 18 / 52

18
PAge heAder..... OPERATING yOUR BREvILLE PROdUCT
NOTE
Use the speed selector table located
on the pulp container for a quick and
convenient juicing reference.
5. Press the ON/OFF switch on the control
panel to ON. The juicer will start to
operate at the selected speed. The speed
can be changed at any time during the
juicing process by adjusting the variable
speed control dial.
NOTE
After 3 minutes, the LCD display will
automatically turn off if the ON/OFF
switch is not turned ON, or a speed is
not selected.
6. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push
the food pusher down slowly.
NOTE
The juicer will automatically stop
operating if the motor is stalled for
more than 10 seconds. This is a safety
feature. Either too much food is being
processed at one time or the pieces
are not small enough. Try trimming
food, cutting food into smaller pieces
of even size and/or processing a
smaller amount per batch.
To continue juicing, reset the Juicer
by pressing the ON/OFF switch on
the control panel to OFF, switch off at
power outlet and remove power cord
from power outlet, then clear the feed
chute, finally plug power cord back
into power point and switch on at
power outlet. Turn the appliance back
on by pressing the ON/OFF switch to
ON.
NOTE
The juicer is fitted with a safety device
which safeguards against overheating
with excessive loads. If overheating
occurs, the juicer will automatically
activate the overload protection
device and the unit will switch itself
off. When the overload protection is
activated, unplug the Juicer from the
power outlet for at least 15 minutes to
allow the unit to cool. Then plug juicer
into the power outlet and use
as normal.