Breville BJE410, Instruction Booklet

Page: 22 / 27

22
PAGE HEADER..... TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Machine will not work
when switched ON
• The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into
the two grooves on either side of the juicer cover.
Motor appears to stall
when juicing
• Wet pulp can build up under the juicer cover if the juicing
action is too vigorous. Try slower juicing action by pushing
the food pusher down more slowly. Follow Disassembling
and Cleaning instructions and clean the filter bowl
surround, the stainless steel filter basket and the juicer
cover.
• The juicer will automatically stop operating if the motor
is stalled for more than 10 seconds. Either too much food
is being processed at one time or the pieces are not small
enough. Try trimming the food or cutting into smaller
pieces of even size and processing a smaller amount per
batch. To continue juicing, reset the juicer by pressing the
ON/OFF switch on the control panel back to OFF then turn
the appliance back on by pressing ON/OFF switch to ON.
• Hard fruit and vegetables will put excess strain onto the
motor if a low speed is selected. Please refer to the juicing
guide to determine the correct speed for the fruit and
vegetables selected for juicing.
Excess pulp building
up in the stainless
steel filter basket • Stop the juicing process and follow Disassembling
instructions. Remove the juicer cover, scrape off pulp,
reassemble and begin juicing again. Try alternating (soft
and hard) vegetables and fruit varieties.
Pulp too wet and
reduced extracted juice • Try a slower juicing action. Remove the stainless steel filter
basket and thoroughly clean mesh walls with a cleaning
brush. Rinse the filter basket under hot water. If the fine
mesh holes are blocked, soak the basket in a solution of hot
water with 10% lemon juice to unlock the holes or wash in
the dishwasher. This will remove excess fibre build up (from
fruit and vegetables) which could be inhibiting the flow.