3
• This appliance can be used by
persons with reduced physical,
sensory or mental capabilities
or lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and if they understand
the hazards involved.
• Do not use the appliance
near the edge of a countertop
or table. Ensure the surface
is level, clean and free of
water and other substances.
Please be aware that vibration
during use may cause
the appliance to move.
• Do not use the appliance on (or
close to) a hot gas or electric
burner, or where it could touch
a heated oven or surface.
• Do not allow the cord to hang
over the edge of a countertop,
or to become knotted.
• To avoid electric shock,
do not immerse the cord,
plug or motor base in
water (or other liquids).
• Installation of a residual
current device (a standard
safety switch on your wall
socket) is recommended to
provide additional safety
protection when using
appliances. It is advisable
that a safety switch (with
a rated residual operating
current not more than 30mA)
be installed in the electrical
circuit supplying the appliance.
Contact your electrician for
further professional advice.
• In order to avoid the possible
hazard of the blender starting
by itself due to inadvertent
resetting of the overload
protector on the motor, do not
attach an external switching
device (such as a timer) or
connect the blender to a circuit
that can regularly switch
the blender on and off.
• Do not operate appliance with
a damaged cord or plug, or
after appliance malfunctions, or
if dropped or damaged in any
way. Stop use immediately and
contact Breville by phone or
email for replacement or repair.
• All maintenance (other
than cleaning) is to be
done by an authorised
Breville Service Centre.
• Authorised Breville Service
Centres can be found on our
website
www.Breville.com.au
Alternatively, you can contact
the Breville Customer Care
Centre by phone on
1300 139 798
or email
