11
Care, Cleaning and Storage
Hints and Tips on how to use the Breville Power Blender
Hints and Tips
• Do not put more than 2 cups of ingredients into
the blender before blending commences. After the
blending process has begun and the blades are turning
you may slowly add another 1½ cups of ingredients
through the inner measuring cup opening if desired.
• Do not blend a heavy mixture for more than 30
seconds at one time without switching off the blender.
For normal blending tasks, such as mayonnaise,
dressings, etc., do not operate for longer than 1
minute at one time without switching off the blender,
stirring the ingredients then continuing operation.
• Do not place hot or boiling foods and/or liquids into
the blender; allow to cool before placing into the
blender jug.
• When using several ingredients, place liquid
ingredients in the blender jug first unless specified in
the recipe to do otherwise.
• When blending thick or dry mixtures it may be
necessary to stop the blender and scrape down the
sides of the jug, once or twice, during blending.
• The blender will not knead dough or mash potatoes.
• The blender is not designed to chop/mince meat or
extract juice from fruit and vegetables.
• Thick mixtures such as patés, puree more efficiently
when the blender jug is ¼ to ½ full.
• Do not use the blender to store food.
• Do not overload the blender with more than the
specified quantity of ingredients as doing so could
cause the motor to stall. Turn the blender off by turning
the speed selection dial to the off ‘0’ position, switch
off at the power outlet and unplug the power cord.
Remove a portion of the mixture from the blender jug
before continuing.
• Do not operate the blender without the blender lid in
position. To add additional ingredients whilst blending,
remove the inner measuring cup and place or pour
ingredients through the opening in the lid.
• Do not fill the blender jug above the 1500ml/1.5LITRE
line. When the blender jug is filled at or near the
1500ml/1.5LITRE line, hold the blender lid in place to
avoid displacement of the lid during operation.
• Do not use metal utensils as they may damage the
blades or blender jug.
• Do not place any objects, other than food or liquid,
into the blender whilst the motor is running.
• Do not remove the blender jug when the blender is
operating. Always ensure the speed selection dial
is turned to the off ‘0’ position, the appliance is
switched off at the power outlet and the power cord is
unplugged from the power outlet.
Suggested Uses
Crush ice
To crush ice, place 1 cup of ice cubes into the blender
jug. Replace the lid and turn the speed selection dial to
ICE (Pulse) for short bursts until ice is crushed. This will
take approximately 15 seconds. When crushing ice, hold
lid in place to avoid displacement during operation.
Bread crumbs
Remove the crusts from the bread and tear into pieces.
Process sufficient pieces at a time to cover the blades.
Up to 5 slices at a time can be crumbed. Stale bread will
produce the best results.
Chopped nuts
Process ¾ cup of nuts at a time. Use the ICE (Pulse)
setting as this will give more even chopping.
Drinks
Fill the blender jug at least ¼ full and remember to leave
room to allow froth to form as the drink is aerated.
Ground coffee
Coffee beans can be ground sufficiently fine for a
percolator or for infusion, but not finely enough for
dripolator or espresso machines. Process ½ cup coffee
beans at a time.
Soups, sauces, purees
The most efficient amount to blend will depend on the
food/recipe used. However, generally, the more liquid
used, the more can be processed at one time. Never
process boiling liquids or hot ingredients, allow to cool
before placing into the blender jug.
BBL300_IB_FA.indd 11
2/11/09 3:23 PM
