9
Control Panel
COLD
HOT
AMBIENT
ml
°C
FUNCTION
FUNCTION DIAL/SELECT
Turn/Press FUNCTION dial to adjust/select
from the following:
MENU -
When using HOT, turn dial to select
between pre-programmed menu options and
the custom setting; press the dial to confirm
selection.
TEMP -
when using Custom, turn dial
clockwise to increase temp and anti-clockwise
to decrease temperature; press the dial to
confirm selection.
VOLUME -
when using Ambient or Custom,
turn dial clockwise to increase volume and
anti-clockwise to decrease volume; press the
dial to confirm selection.
NOTE
TEMP & VOLUME cannot be adjusted once
water dispensing commences.
NOTE
The FUNCTION dial light will illuminate
solid white when the unit is switched on at the
power (to indicate the unit is operational). The
light ring will turn off when water is dispensing
or when the unit enters standby mode after 5
minutes of non-use.
START |
STOP
START/STOP BUTTON
Press to start or stop dispensing filtered water
(ambient, chilled or hot water dispensing).
The water droplet light illuminates solid white
while dispensing, and will flash if hot water is
selected as a reminder that dispensing will not
commence until START/STOP is pressed.
HOT
HOT WATER BUTTON
Press once to access the hot water menu. The
HOT button light will illuminate and the hot
water menu will appear on the LCD screen.
The hot beverage menu offers programmed
ideal brew temperatures recommended for
black, white, green tea, coffee and custom.
Custom allows for manual selection of
temperature (45-100° Celsius) and volume
(100mls to 1.2L).
COLD
COLD WATER BUTTON
Press once to access cold settings. The
COLD button light will illuminate and the cold
water settings will appear on the LCD screen.
The COLD setting allows for manual selection
of temperature (5° to 15° Celsius) and
volume (100mls to 500mls). The COLD
button light will continuously flash when
reaching set temperature.
NOTE
The COLD button blue LED light ring will
continue to cycle on and off in AMBIENT/
COLD/HOT settings to indicate that the
compressor is turning on and off to maintain
the correct temperature.