18
Care, Cleaning
& Storage
The purifier fan heater and filter should be
cleaned at least once every month. Ensure
the purifier fan heater is switched off and
disconnected from the power outlet and allow
all parts to cool before cleaning or storing.
•
Use a clean, dry cloth to clean all external
surfaces of the purifier fan heater.
NOTE
More frequent cleaning may be required
depending on environmental conditions.
BREVILLE RECOMMENDS
•
Always ensure the purifier fan heater is
turned off, switched off at the power outlet
and unplugged and allow the unit to cool
before performing any cleaning or filter
replacement.
8
DO NOT
stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
8
DO NOT
use gasoline, benzine, thinner,
harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the unit.
8
NEVER
use alcohol or other solvents
on this unit.
AIR QUALITY SENSOR CARE AND
CLEANING
•
It is important to keep the air quality sensor
clean for best performance.
•
The air quality sensor is situated above the
back vent (air outlet) at the rear of the unit.
•
Gently vacuum over the openings on the air
quality sensor cover using a small hand brush
tool. Cleaning should occur regularly, at least
once a month (Fig 4).
Fig. 4
•
For more thorough cleaning, remove the air
quality sensor cover by using and Philips head
screwdriver.
•
Gently vacuum the mesh filter of the
air quality sensor using the hand brush
tool (Fig 5).
Fig. 5
Thorough cleaning should occur at least once
every six months.
•
Replace the mesh filter and cover when clean,
ensuring it is screwed securely back into place.
WARNING
The air quality sensor is fragile and can be
damaged if excessive force is used during
cleaning. Use extra care when cleaning.
LPH708_ANZ_IB_B21_FA.indd 18
LPH708_ANZ_IB_B21_FA.indd 18
29/1/21 11:04 am
29/1/21 11:04 am
