background image

22

BREVILLE HOME CONNECT™ APP TROUBLESHOOTING

PROBLEM

WHAT TO DO

Why can’t I connect my purifier 
fan heater to Wi-Fi network?

• 

Check that your purifier is within range of the Wi-Fi router

• 

During the setup process you must be on a secure 
2.4GHz Wi-Fi network.

• 

Make sure the Wi-Fi password you entered is correct.

• 

Check that the filter is fitted correctly in place.

• 

Unplug the purifier for 10 seconds and plug it back in.

How do I change my 
Wi-Fi network to a 2.4GHz 
Wi-Fi network? 

• 

Most dual-band routers support both 2.4Ghz and 5Ghz networks. 
Select the Wi-Fi name that does not end in “-5G”

• 

If your phone is attempting to connect to the 5Ghz network, try 
“forgetting” or temporarily disabling the 5Ghz network.

• 

If you are unsure, or if the 2.4Ghz and 5Ghz networks do not have 
separate names, please contact your internet service provider.

I already have another appliance 
connected to the Breville Home 
Connect™ app, but my purifier fan 
heater won’t connect? 

• 

Close and relaunch the Breville Home Connect™ app

• 

Reset the Wi-Fi on the purifier fan heater by pressing and holding 
the power button for 3 seconds when in standby mode. The Wi-Fi 
indicator will rapidly blink and turn off. 

• 

Re-pair the purifier to the Breville Home Connect™ app by 
following the instructions in this booklet

My purifier fan heater is offline

• 

Make sure your router is connected to the internet and your 
phone’s network connection is working properly.

• 

Check that your purifier is within range of the Wi-Fi router

• 

Delete the offline purifier fan heater for the Breville 
Home Connect™ app. Swipe left (iOS) or tap and hold 
(Android), and tap Delete.

• 

Reset the purifier fan heater by pressing and holding the power 
button for 15 seconds. The Wi-Fi indicator will rapidly blink 
10 times and turn off.

• 

Reconfigure your purifier fan heater with the Breville Home 
Connect™ app. 

• 

NOTE: 

Power outages, internet outages, or changing Wi-Fi 

routers may cause your air purifier to go offline.

If the problem is not listed, please contact Breville Customer Service Centre (see back cover for contact details)

LPH408_ANZ_IB_D21_FA.indd   22

LPH408_ANZ_IB_D21_FA.indd   22

29/1/21   11:08 am

29/1/21   11:08 am

Summary of Contents for AirRounder Connect LPH408

























Reviews: