breviglieri DOBLE, Operating And Maintenance Manual

Page: 15 / 37

doble - maxi doble
- 33 -
WARNING
The heads of the bolts that the hoe blades must be on the side of the hoe blades themselves while the nut and relative
d lues (Nm
If hoe blades/tines are replaced, make sure that the new ones a
DRIVING TORQUE VALUE
Screw categories
M8x1 15 26 36 44
M10x1,25 30 52 74 88
M12x1,25 51 1 127 153
M14x1,5 81 143 201 241
M16x1,5 120 214 301 361
M18x1,5 173 308 433 520
M20x1,5 242 431 606 727
M22x1,5 321 571 803
M24x2 411 731 1028 1234
VERSION WITH BLADES (BK)
The version with blades has a special support rotor with radial This type of machine is particularly suitable for preparing
seed beds on tenacious or soil, or ploughed If all, or even only some of the blades are replaced, it is advisable to
remove and remount one blade at a time to avoid positioning e
VERSION WITH TINES (SPIKES)
This version is with a special spiked rotor on highly resistant pressed steel Can be equipped with levelling
seed beds on tenacious and stony soi
DANGER
It is forbidden to clean the machine whilst it is if the hoe blades/knives become First the
PTO, the tractor and the Wait until all have come to a standstill, then
4.9 STOPPING THE MACHINE
At the end of the job, the operator must:
Disengage the tractor PTO
Lower the machine to the ground
Stop the tractor and engage the parking brake
Make sure that all parts of the machine have come to a standstill
4.9.1 PARKING
To park the machine and unhitch it from the tractor, the operator must:
Make sure that no one is standing or crossing the place where the machine will be parked
Drive to the area where the machine is to be unhitched
Brake the tractor
Lower the bearing stands
Completely lower the machine to the ground
Stop the tractor and engage the parking brake
Disconnect the quick couplings
Remove the driveline from the tractor’s PTO and rest it on its bracket