IMPORTANT INFORMATION
Please read this user’s manual carefully before using your baby monitor and keep it for future
reference. This baby monitor is designed as an aid and should not be used as a substitute for
responsible and proper adult supervision.
Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter/3 feet
away) (picture 1)
Never place the baby unit inside the baby’s bed, cot or playpen (picture 2)
Never cover the baby monitor (e.g. with clothes, towels or blankets) (picture 3)
Never place or use the baby monitor in moist places or close to water (picture 4)
If traveling abroad, make sure that the voltage shown on the mains power adapter corresponds to the
local mains power before connecting to the power supply (picture 5)
To prevent electric shock, do not open the case of the baby unit and parent unit (except battery compartment
covers) (picture 6)
Risk of explosion if batteries are replaced by an incorrect type. For the parent unit, always use rechargeable
batteries. (pictures 7a - 7b)
SETTING UP
1. SET UP THE BABY UNIT
1.1 Power supply
The baby unit uses either household AC current or four AA Alkaline batteries (pictures 8-9)
Main operations
a) Plug the mains power cable into the baby unit (picture 8a)
b) Connect the other end to the main power (picture 8b)
c) Once the main connection is done, the centralized night light will turn on for 1 second (picture 8c)
d) Push the button “ON-OFF” (pic.8d); the “Power” led and “Link” led will turn on (picture 8e)
WARNING: Use only the main power adapter supplied. Using an incorrect adapter may
permanently damage the baby unit.
Battery Operations
The baby unit also works on battery power, so that you can use it even when you are not near to a
mains power socket or during a power cut (picture 9)
a) Remove the battery compartment cover and insert 4 x AA Alkaline batteries into the battery
compartment on the baby unit and replace the battery compartment cover (picture 9a -9b)
