Bretford TVSW12AC, Manual

Page: 11 / 12

1. Product specifications .......................................................................
P.1
2. Components ........................................................................................
P.2
3. Mounting Considerations .................................................................
P.2
4. Setup .....................................................................................................
P.3~6
5. Extra/Optional Solutions ..................................................................
P.7~8
6. Safety ....................................................................................................
P.9
General Use
The BRETFORD CUBE MICRO WALL CABINET provides compact charging
for up to 12 notebook or tablet devices (up to 13.3 inch).
6. Safety
●
Always turn off the power to the product before plugging IN or OUT.
●
Do not unplug the power cord from the outlet when your hands are wet.
●
Do not use cables that are damaged.
●
Do not unplug the cable into an extension cable.
●
This product is designed to be used indoors only.
●
This product is not designed to be operated by a child or student.
●
Only adults should operate or move this product.
●
Do not allow anyone to sit, stand, or climb on the product.
●
Move the product with caution.
●
Keep the product away from water.
●
Keep the ventilation holes unobstructed for air circulation.
●
Do not use the product to store liquids or cleaning supplies.
●
Disconnect the power cable from the wall before relocating the main unit.
WARNING:
Ground Wire Setup
!
This product must only be used for its intended purpose in accordance with operating
instructions . Failure to observe the following notices can result it fire, injury, death by
electric shock or equipment damage.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical mounting system, basic precautions should always be followed,
including the following : Read all instructions before using this product.
DANGER – To reduce the risk of electric shock :
1. Always unplug this product from the electrical outlet before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons :
2. Unplug from outlet before adding or removing parts.
3. Use this product only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
4. Never operate this product if it has a damaged cord or plug. If it is not working
properly, return the mounting system to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the product with the air opening blocked. Keep the air opening free
of lint, hair, and the like.
7. Never drop or insert any object into any opening on the product.
8. Do not use outdoors.
9. Route cords and cables as shown in the installation instruction.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
WARNING: Risk of Electric Shock – Connect this product to a properly grounded outlet
only. See Ground Wire Setup.
Warning: Risk of injury to Persons – do not use the mounting system to support any
product other than the CUBE MICRO WALL CABINET.
Class I Equipment. This equipment must be grounded. The power plug must
be connected to a properly wired earth ground socket outlet. An improperly
wired socket outlet could place hazardous voltages on accessible metal parts.
1. Unfasten the screw
first
2. Fasten the screw back
into the ground wire.
9