STEP 1:
Install screws (CC) into bottom shelf.
STEP 3:
Using the slot cutout on the back of the power strip, slide and snap power strip
onto installed screws toward the grommet hole on the side wall.
NOTE:
Your power
cord should be on the same side as the grommet hole as shown above.
INSTALL OPTIONAL TCPE10 12-OUTLET POWER STRIP
Included on “FF” Models
2 of 3
STEP 2:
Remove the power strip from the steel plate by moving it sideways until it unsnaps.
INSTALL COVER PLATE OR OPTIONAL TCDPT DATA PASS THROUGH PLATE
STEP 2:
Using the hardware provided with the Data Pass Through Plate, install the
TCDPT to the side panel.
STEP 1:
Using the hardware provided install the cover plate under the handle.
