STEP 4
Slide one half of lower compartment closure inside other half to access Junction Box.
Thread the Jumper end through the Substation and plug into Junction Box (Fig. 4).
Place the Power/Data Block into power ring of Substation by aligning Curved Cam
and Pins with groove in Power Ring. Curve Cam must be positioned so when tighten-
ing Hex Bolt, Curved Cam rotates toward center of Substation.
Fig. 4
Fig. 4 shown with parts
removed for clarity
Substation Skin
Open Position
Junction
Box
Jumper
Power/Data
Block
Power
Ring
Hex Bolt
Curved Cam
(must turn 1/4” rotation
to fit in)
