Bretford CUBE TVS10AC User Manual Download Page 18

Product Warranty

Bretford Manufacturing, Inc. ("Bretford") designs and manufactures its products to provide
dependable operation. Therefore, Bretford warrants that all products it manufactures are at
date of shipment — free from defects in material or workmanship. Any product which under
normal use fails to function within the time periods specified below, and found defective in
material or workmanship by Bretford's inspection, will, at Bretford's option be either repaired
or replaced with the same or functionally equivalent product, without charge to you, the end
customer.

This warranty is inapplicable where, in the judgement of Bretford, the defect is attributable
to abnormal wear, misapplication, abuse, accident, misuse, modification or damage after
shipment from Bretford's facility, including damage caused by your failure to properly
maintain the item.

TO THE EXTENT PERMITTED BY APPLICABLE LAW: (A) BRETFORD IS NOT LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR SERVICE OF THE PRODUCT; (B) THE WARRANTY AND REMEDIES
DESCRIBED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. TO THE EXTENT PERMITTED BY LAW, BRETFORD DISCLAIMS
ALL IMPLIED AND STATUTORY WARRANTIES, INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF IMPLIED
WARRANTIES CANNOT BE DISCLAIMED UNDER APPLICABLE LAW, THEN SUCH
WARRANTIES ARE LIMITED IN DURATION TO THE APPLICABLE DURATION OF THIS
WARRANTY. NOTE THAT YOU MAY HAVE OTHER RIGHTS PROVIDED BY LAW.

Warranty Download

You can download a PDF of the product warranty 

here

.

Freight and Delivery Damage

Damaged, lost, or shorted shipments are the responsibility of the motor carrier. Please inspect
all shipments promptly and report damage to the delivery carrier immediately. Carriers require
such reports within 15 days of delivery. Losses due to the failure to timely report damage or
loss is your responsibility.

CUBE Micro Station - User Guide

18 of 23

Summary of Contents for CUBE TVS10AC
























Reviews: