031-11204
Rev. 2 08/2022
7 of 9
Using Your Product
CUBE Tower
TM
Power Adapter Replacement (CUBE Tower
TM
Pre-Wired Only)
The power adapters can be accessed through the side access panel by
removing two screws, with a torx T25 head, at the top and side - right.
See image for location. To remove an adapter, feed the cable from the
outside of the CUBE Tower
TM
through the grommet. Remove the power
adapter from the holder and remove the plug from the e-unit. To reinstall
a power adapter, place the power adapter in the holder with the plug side
up. Push the plug into the e-unit and route the USB-C cord through the
grommet. Reinstall the access panel with the bottom tabs first and then
secure with the two screws.
Access Panel Screws
Adapter holder
Power Adapter Storage
