19 / 24
17 Relative humidity (in-
door) in %
18 Temperature (outdoor)
in °C or °F
19 Sensor channel
6 Setting up power supply
Base unit
1.
Remove the battery compartment cover.
2.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
3.
Replace the battery compartment cover.
4.
Wait until the indoor temperature is displayed on the
base station.
Remote sensor
5.
Remove the battery compartment cover.
6.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
7.
Move the CH slide control to the position for the desired
transmission channel (setting CH1, CH2 or CH3 with
screen display).
8.
Replace the battery compartment cover.
NOTICE! When operating one outdoor sensor, channel 1
is recommended as the default setting.
7 Automatic time setting
After the power supply was established, the clock will auto-
matically search for the radio signal. This will take approxim-
ately 3 to 8 minutes to finish this process.
