28
2. The main unit should not stand close to metal window frames.
3. Please do not using other electrical products, such as headphones
or speakers, operating on the same signal frequency (433.92 MHz).
4. Electrical devices operating on the same signal frequency may also
cause interference. This can include devices used in the neighbor-
hood as well.
main unit channel setting
1. The main unit can be connected with a maximum of up to 3 trans-
mitters.
2. Press the CHANNEL button to switch between the displays of each
channel. The main unit will display the information of the correspond-
ing transmitter. When the symbol
is displayed near the channel
information the automatic display rotation is activated. The display
changes between the information of the connected remote sensors
every 10 seconds.
NOTE!
Der Wechsel zwischen den einzelnen Kanälen über die CH-Taste kann
nur dann genutzt werden, wenn tatsächlich mehrere Außensensoren
mit der Basisstation verbunden sind. Sonst ist diese Funktion deak-
tiviert.
Automatic time setting
1. After the batteries are installed. The clock will automatically search
for the radio signal. It takes about 3-5 minutes to finish this process.
2. If the radio signal is received, the date and time will be set automat-
ically and the radio control signal icon turns on.
If the clock fails to receive the time signal, go ahead with the following
steps:
1. Press UP and DOWN button at the same time for approx. 3 seconds
to initialize radio signal reception manually.
2. If the time signal receiving fails again, the time can be set manually.
manual time setting and user-defined settings
1. In normal display mode, press and hold the MODE button for approx
2 seconds to enter settings mode. ‘24Hr’ will flash.
2. Press the UP or DOWN button to change the value.
3. Press the MODE button to confirm and go to the next value to be
changed.
4. The setting order is 24/12 hour mode >> °C/°F >> hPa/inHg >>
time zone (-2 to +2 hours) >> hours >> minutes >> year >> month >>
date >> language (GE = german / EN = english / IT = italian / FR =
french / SP = spanisch) >> save and exit.
5. If there is no operation for 20 seconds, the existing setting will be
saved and the device returns to normal display mode. You can also
press the MODE button again to confirm and exit.
ANL7007500_7007501DEGB1115BRESSER.indd 28
14.12.15 13:27
