Bresser Quadro Individio, Instruction Manual

Page: 16 / 44

16 / 44
NOTICE! The set weather graphic must correspond ex-
actly to the present weather situation, that it can be in-
dicated correctly even when weather is changing!
6. Finally, press the MODE button to save the settings and
exit settings mode.
11 Alarm setting
1. Press the MODE button several times to select the de-
sired alarm function: Alarm 1 (AL 1) or Alarm 2 (AL 2).
The display changes to the set alarm time.
2. Press the MODE button for about 3 seconds to switch
to the setting mode for the corresponding alarm time.
3. The value to be set is flashing.
4. Press UP or DOWN button to change the value.
5. Press the MODE button to confirm and switch to the
next setting.
6. Sequence of the settings: Hours > minutes > snooze
time
7. Finally, press the MODE button to save the settings and
exit settings mode.
8. To activate the alarm, press the UP or DOWN button
until the corresponding alarm symbol (alarm clock) for
AL1, AL2 or AL1+AL2 is displayed.
9. To deactivate the alarm, press the UP or DOWN button
repeatedly until the alarm symbol (bell) is no longer dis-
played.