Bresser National Geographic 9105700, Operating Instructions Manual

Page: 11 / 32

11
EN
Parts overview
B
ON/LIGHT/OFF-BUTTON

Discs (3 pieces)

Projection lens

Focus dial

Disc tray

Stand

Lamp (Night light)
A
Battery installation
Only adults should insert or replace the batteries.
1. Loosen the battery compartment screw with a small Phillips screwdriver and carefully
remove the cover.
2. Insert one AAA (LR03) battery into the unit with polarity as indicated on the battery com-
partment.
3. Close the battery compartment again.
B
Location and operation
1. Place the unit in the stand (6) and then on a flat and stable platform (e.g. a table). The
optimal projection distance is about 1.8 m to 2 m.
2. Press the On/Light/Off button (1) once to turn on the projector light. Dim or turn off the light
in the room for the best visual experience.
3. Press the button a second time to switch on the lamp function (7) (night light).
4. The third press of the button switches the unit off.
C
Turn the focus knob to focus the image
Adjust the Focus dial (4) until the projected star field is in focus. The image will blur if the
distance is too near or too far.
D
Rotate disc to change image
Light function
The light function is switched on by pressing the ON/LIGHT/OFF (1) button twice. This makes
the projector ideal for use as a night light. It can also be easily removed from the stand and
used as a portable lamp.