EN
15
Quick Start Guide
This Quick Start Guide takes you through the basic steps of the Bresser Observa-
tion Camera. A more detailed manual is available on our website.
Initial Camera Set-up:
1. Open battery cover and install 4 “C” cell batteries in correct polarity (+/-) as
indicated in battery compartment.
2. Open bottom cover.
3. Insert SD card into the camera.
4. Turn switch to
“CAM”
to adjust the Time and Date.
5. Press
the
[M]
button once within 30 seconds to enter the programming
mode.
6. The word PIR will be blinking, press
[OK]
to confi rm the camera’s operation
is PIR detection.
7. Press
[UP]
or
[DOWN]
button until the letter “T” is blinking.
8. Press
the
[OK]
button to start the Time settings.
9. Press
the
[UP]
or
[DOWN]
button to adjust the Minute setting and press
[OK]
to confi rm and move to the Hour setting.
10. Repeat to set the hour and then press
[OK]
to confi rm and move to date.
11. Adjust the Month, Day, and Year by using
[UP]
or
[DOWN]
button. Each time
you fi nish an adjustment you MUST press the
[OK]
button to confi rm and
move to the next fi eld for adjustment.
12. Once done, the word
- dEL -
will be blinking. This stands for “Delete” and will
allow you to format your SD Card. (This will delete ALL images).
13. Press the
[UP]
or
[DOWN]
button until the word CAM or VIDEO is blinking.
14. Press the
[OK]
button ONCE to confi rm the camera into
CAM
mode or into
Video mode. The stars will be blinking.
15. Press
[OK]
to enter the image resolution setting.
16. Press the
[UP]
or
[DOWN]
button to select the desired resolution and press
[OK]
to confi rm.
17. Then the current number of burst shoot is blinking (CAM mode) or the current
video length is blinking (Video mode).
18. Press the
[OK]
button to start settings.
19. Press the
[UP]
or
[DOWN]
button to adjust the setting and press
[OK]
to
confi rm.
20. Press the
[M]
button to exit.
