20
DISPLAY BRIGHTNESS
For the LED display different levels of brightness
can be set as follows: bright, middle, glimmer.
(Only when operated with DC power adapter)
1. Press and hold [ SNOOZE ] button in normal
display mode for approx. 3 seconds to
switch from ‚bright‘ to ‚middle‘.
2. Repeat step 1 to change the brightness level
again as follows: from ‚middle‘ to ‚glimmer‘,
from ‚glimmer‘ to ‚bright‘, ...
The dimming function only works with the power
adapter and after the device has received the DCF
time signal. Once the DCF signal is received the
LED brightness can be dimmed by pressing the
Light/Snooze button for 3 seconds.
ENERGY SAVING MODE
The alarm clock works in energy saving mode
when batteries are used for power supply. In this
mode the LED will not light continously but can
be activated for approx 1 minute by a push on the
SNOOZE/LIGHT button. Also the brightness of the
LED display can not be changed.
DATE AND TEMPERATURE DISPLAY
Automatic display change
The default setting is set to automatic display
change. The display switches every 10 seconds
(current time) or rather every 3 seconds (date and
temperature).
Manual display change
Press the MODE button in manual display mode to
display the desired value. First disable automatic
display mode:
1. Press and hold MODE button in normal time
mode for approx. 3 seconds.
Symbol ON flashes.
2. Press or button to select OFF.
3. Press the MODE button again to save the
settings.
