background image

Niemals mit dem Teleskop in oder in die Nähe der Sonne blicken: 

E

rblindungsgEfahr

!

13

OBSERVATION

Observation

Observation with manual operation

After the telescope is assembled and balanced as described, you are 
ready for manual observation. Pick an easy-to-observe object on Earth 
such as a street sign or traffic light and familiarise yourself with the 
telescope's functions. To achieve the best possible result, please observe 
the following instructions:

•  To locate an object, first loosen the RA clamp (33, Fig 1d) and the DEC 

clamp (17, Fig1d). The telescope can now move freely around its axes. 
First loosen the clamps individually and familiarise yourself with the 
individual movements. Then loosen both clamps at the same time. It is 
important that you familiarise yourself with all the movements of your 
telescope, as handling a parallactic mount can take some getting used 
to, especially at night in complete darkness.

•   Now use the finder scope to locate the object of your choice. When you 

have the desired object in your sights, close the RA and DEC clamps 
again.

•   The eyepiece of a telescope magnifies the image captured by the 

telescope's primary mirror. Each eyepiece has a focal length, expressed 
in millimeters (mm). The smaller the focal length, the higher the magnifi-
cation. For example: an eyepiece with a focal length of 9mm has a higher 
magnification than an eyepiece with a focal length of 26mm. 
Eyepieces with a lower magnification offer a larger field of view, provide 
brighter and higher contrast images and are more comfortable for the 
eye during longer observations. At the beginning of an observation, you 
should always start with a weaker eyepiece, such as the supplied Plössl 
25 mm. Then, when the desired object is centred and focused, you can 
switch to a stronger eyepiece to magnify the object as high as the obser-
ving conditions will allow.

•   Once centred, an object can be brought into focus using the focusing 

knobs on the focusing unit (8 Fig 1b). However, keep in mind that the 
desired object will slowly move out of view due to the rotation of the 
earth on its own axis. This impression is even reinforced at high magnifi-
cation.

Moon Observations

Point the telescope (picture: (Keep in mind, however, that the moon is not 
visible every night) Now practice using the different eyepieces to observe 
different details on the moon. There are many different details to look at on 
the moon, such as craters, mountain ranges, and grooves. The best time 
to observe the moon is during its crescent or sickle phase. At this time, 
the sunlight hits the moon at a very shallow angle, giving its appearance 
a vivid depth. At full moon there are no shadows to be seen at all, which 
makes the surface of the moon look very bright, flat and uninteresting. 
Therefore, when viewing the moon, you may want to consider using a neu-
tral density moon filter. Among other things, this not only dampens the gla-
ring light of the moon, but also increases the contrast at the same time.

Tracking of an object

While the earth turns under the night sky, the stars seem to wander from 
east to west. The speed with which the stars perform this movement is 
called "sidereal velocity".

 

WARNING! 

Never use a tele-scope for an 
unprotected view of the sun! As 
soon as you look directly at the 
sun, or even at its immediate 
surroundings, you risk immediate 
and irreparable damage to your 
eye. This damage to the eye 
usually occurs painlessly and the-
refore without any warning to the 
observer that perhaps everything 
is already too late and that eye 
damage has occurred. Therefore, 
never point the telescope or its 
viewfinder at or next to the sun. 
Never look through the telescope 
or its viewfinder when it is 
moving. During an observation, 
children must remain under adult 
supervision at all times.

IMPORTANT NOTE:

Objects viewed through the view-
finder appear upside down and 
upside down.
Objects observed through the 
eyepiece of the main tube, which 
sits on the telescope via a zenith 
prism, appear upright but also 
laterally inverted.
This effect does not interfere with 
the observation of astronomical 
objects. Incidentally, these effects 
occur with all astronomical 
telescopes.

Summary of Contents for First Light MAK





















Reviews: