Bresser ClimaTemp WS, Instruction Manual

Page: 4 / 12

4
3. Outdoor Thermo Sensor
D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Battery Compartment
D5: Wall Mount Hole
D6: “RESET” button
D7: “C/F” button
D8: Stand
4.1 Main Unit:
Remove battery compartment door and insert 2pcs AA size battery.
Or connect the power cord to the wall outlet. Before connecting the unit to power,
please make sure your local voltage is the same as marked on the adaptor.
Note:

When powered by battery only, backlight would be off. Press snooze button,
backlight will last for around 5 seconds.

When connecting with the adaptor on the premise that batteries have been
installed correctly, this product will switch to the external power supply
automatically.
4.2 Outdoor Thermo Sensor

Batteries compartment (D4) of thermo sensor is locating behind the back cover,

Insert 2 x AAA batteries observing polarity [ “+” and “–“ marks]
5. Weather Forecast Function
5.1 Operation

After power on, or holding “WEATHER” button (B7) for 3 seconds, weather icon
flash on the LCD. Enter the current weather by pressing “
▼
” or “
▲
“button. Press
“WEATHER” button to confirm the setting. The weather forecast may not be
accurate if the current weather entered is not correct. The weather station will
start the first forecast at 6 hours later after the current weather status is entered.

The current weather status should be entered again if the altitude of the main
unit is changed. (Barometric pressure is lower at higher altitude location.
Therefore, altitude change will affect the weather forecast).