9 / 24
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:
1. Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
2. Press the DOWN button once again for approx. 2
seconds to stop the reception of the radio signal.
3. If still no radio signal is received, the time must be set
manually.
9 Manual time adjustment
1. In normal display mode, press the SET button for about
3 seconds to enter the time settings mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the SET button to confirm and switch to the next
setting.
5. Sequence of the settings: Time offset > Hours >
Minutes > Year > Month > Day
6. Finally, press the SET button to save the settings and
exit settings mode.
NOTICE! For more information on the time display in 12- or
24-hour mode, see the chapter "Changing the display".
10 Automatic measurement display
Once the power is established, the readings for the current
environment are displayed on the unit.
11 Clima indicator
