9 / 28
3. Re-tighten the locking knob by hand again.
DANGER! Allow the housing surface to cool down before touching it! Touching hot components
can cause serious burns.
WARNING! Hold the light when the locking knob has been loosened to avoid damage to the
panel!
10 Setting a channel for remote control
1. Press the djustment knob for approx. 2 seconds until two digits will flash in the display (currently
set channel).
2. Rotate adjustment knob to the right (+) to increase the value. Rotate the adjustment knob to the
left (-) to decrease the value.
11 Remote control (optional)
The device can be controlled with a suitable 2.4GHz remote control* over the built-in receiver. When
using the same channel, different devices can be operated at the same time through the rermote con-
trol*.
To control the device through a remote control, proceed as follows:
1. Turn on the device(s).
2. Set the desired receiving channel to all lights being controlled.
3. Set the channel also for the remote control.
NOTICE! Only use the remote control recommended for this type of light! If a light is not to be
controlled synchronously, simply change the channel on the corresponding light.
*not included
12 Technical data
Model
BR-F-36B (bicolor)
Power consumption
36W
LED luminosity
1m/16,000LUX (at 5,600K)
Number of LEDs
360
Luminous flux
3,600 LM
Lamps
LED, not replaceable
Colour temperature
3,200K to 5,600K
Dimmer
Operating voltage
DC 12V power adapter or
optional DC 7.5V 2.4 A
via 1 x NP-F750 lithium battery
Overheating protection
Yes
Fan
Yes, automatic
Operating conditions
dry, 0° C to +40° C
Storage conditions
dry and dust-free, 0° C to +40° C
Table 1:
BR-F Series
NOTICE! The LEDs used in this device have a very long lifespan and do not need to be changed.
The LEDs can not be changed due to technical reasons!
