4
Digital endoscope
· www.bresser.de
www.bresser.de ·
Digital endoscope
Start-up
Switch on device / camera light
The device is turned on when you slide the
switch
up a little, turned off when you
slide the switch
down a little. As you
slide further up, the light on the front of the
camera opens and gradually brightens.
Mount gooseneck/probe
First connect the gooseneck/probe
to the connector and screw it tightly
upwards to arrange it.
Front light
Press the front button to switch the
front light on or off.
Insert batteries
①
Slide the battery cover outward.
②
Gently pull the battery cover
towards you to open it
Now insert the supplied 4 ×
AA batteries into the battery
compartment with the correct
polarity.
Inserting the memory card
Turn off the power, open the cover on the back of the
monitor and insert the memory card as shown in the
picture.
Please make sure that the device
is switched off
Carefully insert the memory card into the
Memory card slot.
Device screen overview
①
Mode Display:
Image Capture / Video Recording / Playback
②
Battery power status:
Full / Medium / Low / Empty
③
Memory card status:
Card inserted / No card inserted.
④
Time and date display
⑤
Notes on button operation
Create recordings
In photo/video mode, press the
button to take photos or
save movie clips.
Change mode
Press the
button to switch
the Photo/Video/Playback mode.
Photo/Video Settings
Press the
button to enter the
photo settings in photo mode or
the video settings in video mode.
General settings
Press the
button to enter
the general settings.
Press the and buttons to
select/change, and then press the
button to save the changed
settings.
①②③
④
⑤
