Bresser 88-31000, Operating Instructions Manual

Page: 25 / 90

25
GB
Calibrating the compass
3. Before using your compass, you need to cali-
brate it, so that
a) the directions are displayed correctly
b) the display works properly
c) the compass arrows are always in the same
position
Inserting batteries
4. What do you have to pay attention to while in-
serting the batteries?
a) You should store the batteries in an upright posi-
tion for 2 days before installing.
b) You have to be careful that the battery is in the
right position in the compartment (+/-).
c) You don’t have to pay attention to anything,
because it doesn’t matter how batteries are in-
serted.
Set the time
5. In order to save the time once set, you have to
a) press the “Count” button.
b) press all the buttons at the same time.
c) press and hold the “Set” button for 2 seconds
after setting the hours and minutes correctly.
Thermometer
6. Which units of temperature can your compass
display?
a) Kelvin and Fahrenheit (K/°F).
b) Fahrenheit and Celsius (°F/°C).
c) Meter and centimeter (m/cm).
Stopwatch
7. How do you turn on the stopwatch on your com-
pass (activate)?
a) Push the “Second’ button once.
b) Push the “Set” button twice.
c) First push the “Count” button and then the
“Compass” button.