8
Automatic time setting via DCF time signal
After inserting the batteries the time will be set
automatically via DCF signal. This process may
take a few minutes.
Initiate to receive the DCF time signal manually
NOTE!
Use this function when e.g. automatic summer/
winter time change does not work or the wall
clock temporarely receives no time signal.
1. Press and hold the DOWN button (12) for 3
seconds to start manual search for the DCF
signal.
2. Wait approx. 2-5 minutes until the current time
will be displayed.
Manual time setting
NOTE!
It is necessary to set the time manually in places
where no radio signal is received.
If automatic radio signal reception is enanbled,
the functions of all buttons, except UP and
DOWN, are disabled. In this case press and hold
the DOWN button (12) for approx. 5 seconds until
the symbol disappears. Automatic signal re-
ception is now disabled.
1. Press and hold the TIME SET button (11) in nor
-
mal time display mode for approx. 3 seconds to
change to time setting mode. Year figure flashes.
2. The RCC (Radio Controlled Clock) display ap-
pears, press the UP (10) or DOWN button (12)
to change the value (ON/OFF). Confirm your
entry with the TIME SET button (11).
3. Repeat step 1 to select the other values in
the following order: Time zone, hour, minu-
te, second, language of the weekday display
(GER=German, ENG=English, NOR=Norwegi
-
an, RUS=Russian, DAN=Danish, DUT=Dutch,
ITA=Italian, ESP=Spanish, FRE=French)
4. Press the UP (10) or DOWN (12) button to ch-
ange the value.
