Bresser 433MHz, Instruction Manual

Page: 19 / 36

19
Rotating between Different Clock/Calendar Displays
In Clock and Alarm Mode, each press of SET rotates clock display between:
- Hour: Minute: Weekday
- Hour: Minute for UTC (Coordinated Universal Time)
- Hour: Minute: City
- Hour: Minute: Second
- Month: Day: Year (or Day: Month: Year depending on settings)
Activating/Deactivating the Time Alarms
1. In Clock and Alarm Mode, each press of ALARM/CHART rotates clock display between:
- Weekday Alarm Time (displays OFF if weekday alarm deactivated)
- Single Alarm Time (displays OFF if single alarm deactivated)
- Pre-Alarm Time (displays OFF if pre-alarm deactivated)
2. When the above alarms are displayed, pressing UP or DOWN will activate/deactivate the
corresponding alarm.
Note: Press SET anytime during alarm selection mode to return to normal clock display.
Setting up the Time Alarms
1. In Clock and Alarm Mode, press ALARM/CHART to select alarm which you wish to confi gure.
2. Press and hold ALARM/CHART until hour starts fl ashing in the display.
3. Set Alarm Hour:
Press
UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARM/CHART to confi rm your selection.
4. Set Alarm Minutes:
Press
UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARM/CHART to confi rm your selection.
5. Set Duration of Snooze Function (all three alarms share same snooze time duration):
Press
UP or DOWN to adjust value. Press and hold either button for fast advance.
Press ALARM/CHART to confi rm your selection.
6. Upon completion the display will be returned to the alarm selection screen.
Note: Pre-alarm cannot be activated if weekday alarm or single alarm is not enabled.
GB/IE