BRERA GRANTURISMO GT2, Instruction Manual, Page: 4 / 14

1 . Chrono Minute Hand
2 . 24 Hour Hand
3 . Chrono Second Hand
4 . Second Hand
5 . Date Window
GRAN TURISMO - GT2 CHRONO
A . Crown
B . Date
C . Time Setting
SETTING THE TIME:
• Unscrew the crown, gently pull the crown out to the 2nd click – position (C).
• Turn the crown until the desired time appears.
• Gently push crown in and screw it back – position (A).
SETTING THE DATE*:
• Unscrew the crown, gently pull the crown out to the 1st click – position (B).
• Turn the crown in a counter-clockwise direction until the desired date appears.
• Gently push crown in and screw it back – position (A).
*IF the time is set between the hours of 9:00pm and 1:00am, the date may not change on the following day.
SUBDIAL 24 HOUR:
• The 24 hour sub-dial indicates if the time is am or pm.
MEASURING TIME WITH THE CHRONOGRAPH:
•
The chronograph can be started and stopped each time pusher (A) is pressed. Pressing pusher (B) will reset all
the chronograph hands to their zero positions.
RESETTING THE CHRONO SECOND HAND TO THE “12” POSITION.
• Unscrew the crown, gently pull the crown out to the 2nd click – position (C)
Keep pressed the chronograph pusher (A) and release it when close to 12, then manually click the pusher (A) until
you reach position 12. Gently push crown in and screw it back – position (A).
1
2
3
4
5
A
Pusher A
Pusher B
B C
USING THE CHRONOGRAPH:
• The chronograph is able to measure and display time in 1/1 second up to maximum of 59 minutes, 59 seconds.