Brentwood KT-2200, Operating And Safety Instructions Manual, Page: 4 / 12

4
Using Your Dispenser:
1.
Open the lid then fill the water into the water reservoir. CAUTION: Do not overfill the
product or operate it when empty. Close the lid.
2. Select your water temperature then switch to ON. When water is ready, place your cup
under the spout and press button to dispense.
3. Press the switch to the OFF position, when finished using.
4. Repeat the above steps whenever you would like hot water.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NOTICE: To avoid damaging the product, do not pour cold water into the Appliance after use
and do not use abrasive cleaners/pads to clean any part of the product.
WARNING: Do not place any part of the product in a dishwasher.
•
Appliance should only be cleaned with a soft damp towel and dried before storing. DO
NOT USE RUNNING WATER. Water tank can be detached for cleaning.
•
Dry all parts thoroughly before storing or using again.
•
After cleaning the appliance, please open the drainage stopper in order to clean up waste
water, pls tighten the drainage stopper after opening it.
•
You can remove the spout(the spout is removable) so as to clean up scale deposit.
Note: If found water leakage from the bottom, pls tighten the drainage stopper.
Note: The appliance has a reset thermostat to recover the
heating function for abnormal operation, if the unit is no
power, stop working, not boiling the water, you can reset
the thermostat by a reset key easily.
Drainage