Brentwood HOME Base II, Owner'S Manual

Page: 15 / 28

-12-
PAIRING REMOTE
STEP 1
Make sure the batteries work fine. Replace them when needed.
STEP 2
Plug the power cord to the power source.
The original remote that comes in the box is already paired to the base. No further action is required.
In the event that the remote is not paired with the base, follow the steps below.
STEP 3
Press and hold head lift and foot lift simultaneously, then press and hold the button on the cord of control
box for 3 seconds until your hear 2 beeps sound, the remote is then paired.
Pairing Button