Brentwood Select AF-200BL, Operating And Safety Instructions Manual

Page: 4 / 15

4
Parts:
Using Your Fryer:
Attention: First use may cause a slight odor or small
smoking upon heating, it is normal. This is a result of the
heating element chemical reaction. It quickly goes away.
1. Carefully pull the pan out of the fryer and put the
ingredients in the basket.
2. Slide the pan back into the fryer, carefully align with the guides in
the body of the fryer.
WARNING: Never use the pan without the basket in it.
3.
To switch on the appliance, turn the timer knob to the required preparation time.
4. Turn the temperature control knob to the required temperature.
Note: If you want, you can also let the appliance preheat without any ingredients inside. In
that case, turn the timer knob to more than 3 minutes and wait until the heating-up light
goes out (after approx. 3 minutes). Then fill the basket and turn the timer knob to the
required preparation time.
5.
Some ingredients require shaking halfway through the preparation time. To shake the
ingredients, pull the pan out of the appliance by the handle and shake it. Then slide the
pan back into the fryer.
Caution: Do not press the button the handle during shaking.
Tip: To reduce the weight, you can remove the basket from the pan and shake the basket
only. To do so, pull the pan out of the appliance, place it on a heat-resistant surface and press
the button of handle. and lift the basket out of the pan
Timer
Temperature
Control Knob
Frying basket
Vent
Drip Pan
Handle