4
Parts:
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there
may be accessory parts contained within the packaging material.
WARNING: Before your first use, wash the Glass Jar, Filler Cap, Lid, and Blade
Assembly using warm soapy water. Rinse thoroughly and dry before assembling the
Blending Jar.
Blender Jar assembly is as follows:
1.
Turn the Blending Jar upside down and place on a flat surface.
2.
Add the Blade to the Base and top with the Rubber Gasket.
3.
Insert Blade Assembly with the Gasket between the Glass and the Blade.
4.
Turn the Base clockwise until it is tightly secured.
5.
Turn the assembled jar right side up. You may choose to add water to the jar over
a sink to make sure the base was positioned correctly and does not have leakage.
Using Your Blender:
WARNING: Avoid contact with moving parts.
1.
Place the Motor Base on a clean, flat surface.
2.
Fill your Glass Jar with your favorite ingredients; do not fill past the Max line.
Motor Base
Bade Assembly
-Blade
-Gasket
-Base
Filler Cap
Lid
Handle
Glass Jar
50 oz. Capacity
Off/ Pulse
Button
Hi/Lo
Button
12 Speeds
Non-Skid Feet and
Cord Wrap
