Valid from 07 | 2018 until further notice
Operation
|
11
10
|
General
Mehr Infos auf
www.brennwagen.de
Before using the barbecue, please remove all upholstery and other packaging
materials. Make sure that the GTX 1500 is firmly and securely on a straight plane.
Fix the brake (see section Operating Instructions: Actuating the brake). For the
first time, heat the grill to 200°C to completely remove any packaging residue.
The drawbar and the fireplace are included separately in the package. Take the
drawbar and put it vertically on the drawbar holder. Secure the drawbar with
the help of the socket pin. This can only be plugged in by holding down the red
button.
Push the pin through the hole provided until it stops, then release the button.
Mount the chimney using the prefabricated holes and threads.
For this you need in addition a 6er Allen key. Position the chimney with the three
holes so that they release the three recessed threads. Lightly tighten all three
screws for secure positioning, then tighten them.
COMMISSIONING
General about charcoal
Charcoal is a solid fuel.
It is produced when air-dried wood with a maximum of 18% water content is heated
to 275 ° C under exclusion of air and without oxygen supply. During this process,
the so-called pyrolysis, the temperature rises by itself to 350-400 ° C. Easily burn
volatile gases in the wood. The residue obtained is about 35% charcoal. This beats
no flames when grilling and burns at a higher temperature than wood.
OPERATION
Only follow the instructions below when the coal and grill are
completely cold!
Take the grill and put it aside. Fill the
coal tray with coal, but never more
than 1.0 kg, otherwise the grill will
get too hot.
Light the charcoal. Note the war-
nings (see section Warnings). For
an optimal heating, use our kindling
fireplace. You can get this at the
dealer of your trust or under
www.brennwagen.de.
CHARCOAL
Haeting up
Summary of Contents for GTX 1500
Page 12: ......
