brennenstuhl RCS 1000 N Comfort, Operating Instructions Manual

Page: 19 / 116

GUARANTEE
This device has a 2-year guarantee from the purchase date.
Please keep the purchase receipt as verification. The guaran-
tee only applies for material or manufacturing defects but
not for wear parts or damage due to improper use. The gua-
rantee expires in the event of unauthorized intervention.
Your statutory rights are not limited by this guarantee.
n the event of a guarantee case please contact the service
department via telephone.
This is the only way to ensure your device can be sent in at
no charge. The original guarantee period does not extend due
to repairs or replaced parts.
Declaration of conformity
We, Hugo Brennenstuhl GmbH & Co. KG, declare that the
radio equipment of type RCS 1000 N is in conformity with
Directive 2014/53/EU and RoHS2 Directive 2011/65/EU.
The full text of the EU Declaration of Conformity can be
found under the following Internet address:
www.brennenstuhl.com/konformitaetserklaerung/ke_1507450.pdf
Manufacturer
H. Brennenstuhl GmbH & Co. KG, Seestraße 1-3, D-72074 Tübingen
For further information, we recommend reading the
Service/FAQs on our homepage www.brennenstuhl.de
19
RCS 1000 N Comfort
Fault Cause Repair
Switch outlet
does not switch on.
System code for
the switch outlet
not properly set.
Set the system
code on the
remote control.
Range between
the remote
control and the
switch outlet is
not sufficient.
Reduce the dis-
tance between
the remote
control and
switch outlet.
Electrical devi-
ces cause inter-
ference.
Remove poten-
tial sources of
interference.
079615 BA_Funkschaltset RCS 1000 N.qxp 12.06.17 15:16 Seite 19