Mounting the smoke detectors
ATTENTION: This smoke detector is mainsopera-
ted. Have cable installation done by a qualified
technician and compliant with current regulations
for electrical installations. The circuit used must
be a hardwired baseline, which cannot be acciden-
tally shut off by a normal user. Only use approved
wires.
Refer to the following illustration for correct
wiring. The connector poles are on the side of
every BR 5232 smoke detector.
Changing / inserting batteries
Action
Description
Removing housing To take out a battery, the
housing must be turned
counterclockwise. The housing
can then be removed and the
battery is freely accessible.
Removing the
Remove the battery from the
old battery
battery compartment.
22
Operating Instructions
BR 5232
052109 Rauchmelder BR 5232 02.06.2009 19:19 Uhr
