BHG-2000
5531
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax +48 5856 300 80,
15
Translation of the original instruction
manual
WARNING! BEFORE USING POWER TOOLS CAREFULLY READ THESE
INSTRUCTIONS AND KEEP IT FOR FURTHER USE
The construction and use
WARNING ! The device is used to operate inside the room.
Heat gun is a power tool to manually type of insulation class II.
Double insulation heat gun and an integrated element of protection against overheating
(thermal) ensure safe use.
It is equipped with an electric motor powered by alternating current, driving the turbine
wheel forcing the air to flow through the heating element. The air flow is directed through the
nozzle at the place of work. The construction of a heat gun allows the selection of air
temperature by selecting one of the temperature ranges as well as adjust its thanks to the
use of liquid temperature control knob. Heat gun is used for removing paint, burning seized
threaded connections in order to facilitate their spin and to heat frozen water pipes, locks,
padlocks, etc. Heat gun can also be used for drying wood elements prior to machining,
shrink "t-shirts" shrinkable, soldering and other applications requiring heat with a stream of
hot dry air. Heat Gun is intended for amateur use.
WARNING ! Do not use the power for its intended purpose.
Technical data
Voltage:
230V~/50Hz
Rated input:
1000 W / 2000 W
Temperature:
350
ºC(I), 550ºC(II)
Air flow:
300l/min(I), 500l/min(II)
Weight:
0,8kg
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious