Page 2
_______________________________________________________________________________
Step 1 Setting up the first remote/channel
Tension motor
STOP until 2x
OK
Put tension on the motor, the product
Press and hold the
STOP
button until the
Transmitter/channel
moves up and down. The motor beeps.
product moves 2x up and down and beeps 3x. has been set.
If NO end positions are set, the product will move in the pulse / step operation. Go to STEP 2.
If end positions are set, the product will continue go to its end position. Go to STEP 4.
NOTE: It is possible that the correct end positions have NOT been set. Go to OPTION A manual adjustment
or go to OPTION B and then to STEP 3A to automatically set the end positions.
______________________________________________________________________________
Step 2
Adjusting the direction of rotation(Only if the direction of rotation is not correct)
Only possible if no end positions are set, otherwise first option B (Delete end positions), after that, Step 2.
▲
+
▼
until
1x
OK
Press
UP
and
DOWN
button
The direction of rotation of
simultaneously, until the product moves.
the
motor is
OK.
_______________________________________________________________________________
Step 3A
Automatically setting the end position
If no end positions have been set, the motor only moves in pulse mode.
▲
OK
Press the
UP
button, until the product moves to
The product automatically goes
The top- and down-
the desired top position and stops at resistance. down and stops in case of resistance.
position is set.
When the roller shutter has been up and down 50 times, the motor checks the end positions and adjusts them if necessary.
_______________________________________________________________________________
Step 3B
Manually setting the end position.
If no end positions have been set, the motor only moves in pulse mode.
1. Set the desired top position.
▲
+
STOP Press and hold until 2x
OK
Go with the
OPERATING-
Press and hold the
STOP
and
UP
button until
The desired topposition is set.
buttons to the desired topposition.
the motor moves up and down 2x and beeps 3x.
