BREL BREL-Motors MLE22-0.5, Manual

Page: 4 / 6

Page 4
_______________________________________________________________________________
Step 3 Setting the end limits
If no limit positions are set, the motor will only move in the pulse setting.
1x P2 1x
▲
1x P2

1x
▲
Press the
P2 Press the button Press the P2 Set the product on the
button. The motor up . The motor button. The motor desired top position.
moves momentarily moves momentarily moves momentarily
STOP until

1x
▼
STOP until

Hold the stop button until the Set the product on the end position. Hold the stop button until the
motor moves momentarily. motor moves momentarily.
_______________________________________________________________________________
Step 4 Setting third limit position
If you press the stop button for more than 3 seconds, the motor will move from any position to the third limit position.
1x P2 2x STOP

Go to the desired
Press 1x the P2 Press stop It moves momentarily.
third limit position button. button 2x. for confirmation.
To remove the third limit position, you must go to the third position and repeat above action.
_______________________________________________________________________________
Additional settings
______________________________________________________________________________
Option A Reset all
P1 3x

Release P1
OK
Press P1 until the motor moves 3x.
Release P1 .
______________________________________________________________________________
Option B Delete limit position
1.
P1 2x

Release P1.
OK
Press P1 until the motor moves 2x.
Release P1 .