brel-motors MGS-45, Manual

Page: 2 / 2

Page 2
_______________________________________________________________________________
Wiring chart
.
_______________________________________________________________________________
Installation motor and rail
Attach the rail to the wall / ceiling.
Mount the rail not vertical.
If the motor don’t want to click easily, turn the gear wheel a bit and try again.
_______________________________________________________________________________
Setting the end positions
Operate the motor for the first time and it automatically searches the end positions.
1x 
 

|

 
 
 
 
 
 1x 
 

|

 
 
 
 
 

Press the open button. The curtain opens completely Press the close button.
The curtain closes completely
DO NOT press STOP ! and stops hard at the end. and stops hard in the middle.
If the end positions are set with a hard stop, the curtain will stop 1 cm before the end in the future.
_______________________________________________________________________________
Cancel end positions Go to previous action to automatically reset the end positions.
Hold down P1. LED will light up for a long time. Release when the LED flashes and goes out.