brel-motors Brel BJE24D, Manual

Page: 2 / 5

Page 2
______________________________________________________________________________
Fu
nctions motor Installation of the motor
Motor Cone
Wall bracket
Headrail
Motorbracket VB/PB/Roman
Bottomrail
_______________________________________________________________________________
Step 1 Setting up the first remote/channel
P1 until        STOP until 2x       
OK
Hold P1 or put tension on the motor, the
Press and hold the STOP button until the Transmitter/channel
product moves up and down. . product moves 2x up and down. has been set.
If NO end positions are set, the product will move in the pulse / step operation. Go then to STEP 2 .
If end positions are set, the product will continue to its end position. Go then to STEP 4.
NOTE: The correct end positions may not be set. Then go to OPTION A.
______________________________________________________________________________
Step 2 Adjusting the direction of rotation
Only possible if no end positions are set, otherwise first option B (Delete end positions), after that, Step 2.
▲ + ▼ 1x       
OK
Press
UP and DOWN button The direction of rotation of
simultaneously, until the product moves. the motor is OK.
_______________________________________________________________________________
Step 3 Manually setting the end position.
If no end positions have been set, the motor only moves in pulse mode.
1. Set the desired top position.
▲ + STOP Press and hold until 2x       
OK
Go with the
OPERATING- Press and hold the STOP and UP button until The desired topposition is set.
buttons to the desired topposition. the motor moves up and down 2x.