Settings
29
Cirrus G5
40
41
5.11 Adjusting the seat depth/
centre of gravity
In addition to the sliding seat, the seat depth
can be adjusted in 3 steps of 30 mm by
moving the backrest brackets
forwards or
backwards.
•
Unscrew the bolts
on both sides of the
wheelchair. Move the brackets to the desired
position and tighten the bolts. There should
always be one or two open holes between
the bolts.
•
Unscrew the gas spring bolt/nut
and
move to the hole that corresponds with the
holes for the backrest bracket.
• When using the foremost position of the
backrest bracket, move bolt/nut
to the
rear hole
Warning!
Adjusting the centre of gravity can affect the
chair’s driving characteristics, balance and
tipping point. Exercise particular care when
you start to use the chair again.
Summary of Contents for Cirrus G5
Page 1: ...Cirrus G5 User manual Manual wheelchair MB3171 EN ...
Page 2: ...2 Cirrus G5 ...
Page 37: ...Cirrus G5 37 ...
Page 47: ...Cirrus G5 47 ...