background image

ENGLISH

15  

BasiX, RubiX, RubiX XL Rev. 2

0806/1/ST-000690646.EMS

Overall width:

•  With standard wheels including handrims, close mount:

 

BasiX:  

SW +19 cm  

RubiX:  

SW +19 cm

•  With drum brake wheels including handrims, close mounted:

 

BasiX:  

SW +21 cm  

RubiX:  

SW +21 cm

Folded dimensions: 

•  With standard wheels:

 

BasiX:  

30 cm  

RubiX:  

30 cm

•  Without standard wheels:

 

BasiX:  

24 cm  

RubiX:  

24 cm

Weight in kg: 

Technical Data

Maximum load:

Basix, RubiX 

                       up to a load of 125 kg

Reinforced version RubiX XL       up to a load of 160 kg

Weight in kg:

Transportation (without footrest, wheels, sideguard)      8.4 kg

Transportation RubiX XL 

(without footrest, wheels, sideguard):   

            11.4 kg 

 

 

Footrest (unit): 

 

 

                           0.8 kg

Standard sideguard (unit):   

                           0.8 kg

24" rear wheels (solid) (pair): 

                           3.8 kg

The wheelchair conforms to the following standards:

a) Requirements and test methods for static, impact and fatigue strengths (ISO 7176-8)    

 

Yes •

b) Power and control system for electric wheelchairs requirements and test methods (ISO 7176-14)  

N/A •

c) Climatic test in accordance with ISO 7176-9    

 

 

 

 

 

 

N/A •

d) Requirements for resistance to ignition in accordance with ISO 7176-16 (EN 1021-1/2)  

 

Yes •

Standard 

reference

min.

max.

Standard 

reference

min.

max.

Overall length 

with legrest

770 mm 

(12”)

1060 mm 

(24”)

Seat plane 

angle

Overall width

470 mm 

790 mm

Effective seat 

depth

410 mm

480 mm

Folded length

770 mm

1060 mm

Effective seat 

width

380 mm

600 mm

Folded width

300 mm

300 mm

Seat surface 

height at front 

edge

375 mm

505 mm

Folded height

900 mm

950 mm

Backrest angle 74°

80°

Total mass

14,9 kg

17,3 kg

Backrest height 410 mm

460 mm

Mass of the 

heaviest part

-

2,0 kg rear 

wheel 24"

Footrest to seat 

distance

350 mm

500 mm

Static stability 

downhill

10°

10°

Leg to seat 

surface angle

118°

118°

Static stability 

uphill

10°

10°

Armrest to seat 

distance

220 mm

240 mm

Static stability 

sideways

10°

10°

Front location 

of armrest 

structure

280 mm

340 mm

Energy 

consumption

N/A

N/A

Hand rim 

diameter

490 mm

530 mm

Dynamic 

stability uphill

N/A

N/A

Horizontal 

location of axle

- 35 mm 

(22”)

+ 35 mm 

(12”)

Obstacle 

climbing

N/A

N/A

Minimum 

tunring radius

800 mm 

(22”)

850 mm 

(12”)

Maximum 

speed forward

N/A

N/A

Minimum 

braking 

distance from 

max. speed

N/A

N/A

Maximum occupant mass (test dummy mass): 125 kg

Summary of Contents for BasiX




















Reviews: