Back of
Mid Leg
H
b
x1
H
b
x4
H
e
x2
C
D
d
x2
I
J
d
x4
d
x4
e
1
2
3
4
5
d
4.
Slide Front Spreader (H)
through the slot in the Front
Mid Leg and insert the end into
the slot in the Front Left Leg
(C). The tenon on the spreader
should be toward the front as
shown. Fasten the Righthand
Arm/Leg assembly from Step 1
to the Seat Base as in Step 3.
Be sure the tenons of the
spreader are in the front leg
slots.
5.
Turn the assembly from Step 4 onto its front side so the Spreader and
Mid Leg holes are face up. Fasten the Spreader (H) to both Front Legs (C
& D) using (2) of hardware (b) at the end of each spreader. Use the 6" bit
(f) for these screws. Hold the Mid Leg square to the seat front. Fasten it to
the Spreader (H) using (1) of hardware (b) - see back of Mid Leg above.
e
Alternate
View
6.
Starting with LH
Back Assembly (I),
slide it into the seat
frame as shown.
Hand-tighten the
bolt positions 1 & 2
at right, arm bolt
first then the 4
bottom bolts.
Repeat the process
for the RH Back
Assembly (J), bolt
positions 3 & 4.
Finally, hand-
tighten the middle
bolts (position 5).
Once all bolts are
seated, tighten
them fully in the
numeric order
shown.
4
CI-1805 Assembly
