d
x4
I
e
Arm
Rest the Inner
Leg on the
Side Rail of the
Seat Assembly.
d
x4
J
e
x2
6.
Attach the LH Back Assembly. It is easiest if you start with (1) of
hardware (e) in your hand. Lift the LH Back Assembly (I) between the first
two Side Rails as shown. Rest the inner leg of the back on its Side Rail and
insert the hardware (e) in your hand through the back rail and into the arm,
turning the bolt a couple times to hold it in place. Install (4) of hardware
(d), two in each Back Rail a turn or two by hand. Once all (5) bolts are in
place, tighten them.
7.
Lift the Middle Back Assembly (J) in place.
Rest the Back Rails on the seat Side Rails and
insert (2) of hardware (e) into the back rail
connecting it to the LH Back from Step 6,
hand-tightening for now. Insert (4) of
hardware (d) into the bottom holes of the
back, two per side.
Once all (6) bolts are
in place, tighten
them.
6
CI-1803 Assembly
