10
To decrease misting, turn the
water valve clockwise and back
towards the 3 o’clock position.
b. If there is not enough mist,
the water valve output is not
open enough. Turn the water
valve counter clockwise by a
few degrees until the cooling
and misting are ideal.
Control panel – Locking feature:
When the locking feature is activated
only the power button will function,
all other features will be locked.
1. To activate the locking feature
hold down the fan speed and
buttons for 5 seconds until the
LED lights begin to blink.
2. The locking feature is now activated,
the lights will continue to blink to
indicate that the locking feature
is on.
3. This will lock: oscillation, atomizer,
and fan speed. Power button
will still function.
4. To unlock the controls, hold down
the fan speed and buttons
for 5 seconds until the LED lights
stop blinking.
Control panel – Memory feature:
The Breezer Oasys control panel is
equipped with a memory feature.
When it is powered off it will
remember the settings of its last use.
When powered back on, it will
resume the same oscillation,
atomizer, and fan speed settings of
its last use.
Control panel – Dim/Brighten
LED lights:
The Power Breezer is equipped with
a feature to dim/brighten the control
panel’s LED lights:
To
dim/brighten
the control panel
LED lights:
1. Press and hold the atomizer
button for one second
then release.
2. The atomizer button’s LED
light will blink indicating you have
initiated the dim/brightening
feature.
3.
To dim,
repeatedly press the fan
speed button until the LED lights
are dimmed to the desired level.
NOTE:
The dimming feature’s lowest
level will turn off the LED lights.
1.
To brighten,
repeatedly press the
fan speed button until the LED
lights are brightened to the desired
level.
2. Press atomizer button once
to exit dim/brightening feature.
Current settings are set and saved.
ENGLISH