background image

Changing Strings on your Mandolin

 

When changing strings, pay close attention to the location and orientation of 

bridge on the body. When strings are removed, the bridge may move. If you 

remove all the strings at once, it will be unsupported and will fall off. It is a 

good idea to mark the location of the bridge prior to changing strings. Place 

small pieces of masking tape on the top of the mandolin at each point of the 

bridge base to mark the location. Also note the orientation of the bridge, and 

mark one side with tape if you are not sure you know which way it goes. To 

ensure proper instrument intonation,  the bridge must be in the correct location. 

It is also a good idea to protect the finish of the instrument with a soft cloth 

while changing strings. String ends can scratch the finish, as can any movement 

of the bridge. Please call Breedlove if we may be of assistance during your first 

string change.

Electronic Pickups for Mandolins

For minimum acoustic impact and a rich, naturally balanced tone, Breedlove 

recommends the Schertler C-DYN-M, an electrodynamic contact microphone 

co-designed by Schertler and Breedlove. This pickup is a full-bodied 

electrodynamic contact microphone which can also be coupled with a 

condenser microphone. It requires no phantom power.

 

 

Floating Fingerboard Extension

Adjustable Bridge

13

Summary of Contents for American Series C20/SM





















Reviews: