Volledige bedieningshandleiding 2
© Bredenoord 2017
6
3
Protections
To ensure safety of personnel and machine, various protections are installed on the ESaver.
3.1
Control circuit protections
The panels contain fuses and circuit breakers for the control circuits. The name and function of the breakers
can be found on the cable ducts and in the electrical schematics. For correct operation, all of the breakers in
the control panel should be ON.
There can be dangerous voltages in the electric panels. When a breaker or fuse must be switched, it
should be done by qualified personnel.
3.2
Emergency stop
An emergency stop is mounted on the control panel or on the outside of the housing. This
switches off the machine during an emergency situation. After using the emergency stop
button, the inverters will be directly switched off and the engine will stop.
Before restarting the following procedure has to be succeeded.
·
Reset the emergency stop by turning it counterclockwise.
·
Reset the alarm on the control panel.
·
Start the ESaver.
The emergency stop on the outside can be covered with a lid. The risk that exists while covering the
emergency stop should be considered carefully.
The emergency stop only switches off the ESaver! A connected genset is not switched off.